CGRRT - ILUX BRUSHING LIQUID, 333
- MSDS: CGRRT
- Manufacturer: INTERNATIONAL PAINT CO INC
- Product Name: ILUX BRUSHING LIQUID, 333
- National Stock Number: 8010-00N008991
Product Identification
Product ID:ILUX BRUSHING LIQUID, 333
MSDS Date:06/15/1993
FSC:8010
NIIN:00N008991
MSDS Number: CGRRT
Responsible Party
UNION, NJ 07083-0386
US
Emergency Phone: 201-686-1300
Info Phone: 201-686-1300
Cage: 26351
Contractor
Telephone: 800-589-1267/800-854-6813
Cage: 26351
Ingredients
LIGROINE; (MINERAL SPIRITS LIGROINE)
CAS: 8032-32-4
RTECS: OI6180000
Fraction By Weight: 95-100%
OSHA PEL 300 PPM
ACGIH TLV: 300 PPM
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE/CHRONIC: NONE SPECIFIED BY
MANUFACTURER.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:SKIN AND RESPIRATORY CONDITIONS.
First Aid
First Aid:IF NEEDED, GET MEDICAL ATTENTION. INGESTION: CALL MD
IMMEDIATELY TO DETERMINE WHETHER OR NOT TO INDUCE VOMITING. EYES:
FLUSH WITH POTABLE WATER FOR AT LEAST 15 MINUTES. SEE MD . SKIN:
FLUSH WITH COPIOUS AMOUNTS OF WATER. SEE MD . INHALATION: REMOVE
TO FRESH AIR. SUPPORT BREATHING (GIVE OXYGEN OR ARTIFICIAL
RESPIRATION) .
Fire Fighting
Flash Point:125F,52C
Lower Limits:1.0%
Extinguishing Media:FOAM, CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH APPRVD SCBA & FULL PROT EQUIP .
SMOTHER FLAMES W/ONE OF THE ABOVE EXTING MEDIA. WATER MAY BE USED
TO COOL UNOPENED CONTRS, BUT MUST (SUP DAT)
Unusual Fire/Explosion Hazard:CONTAINS FLAMMABLE SOLVENT. DO NOT USE IN
AREAS WHERE SPARK OR OPEN FLAME ARE PRESENT.
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
INHALATION OF VAPORS. VENTILATE AREA. CLEAN UP WITH ABSORBENT
MATERIALS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:RECOMMENDED GROUNDING AND BONDING OF
CONTAINERS WHEN TRANSFERRING LIQUIDS AND POWDERS TO AVOID STATIC
CHARGE BUILD-UP.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:IN OUTDOOR/OPEN AREAS, W/UNRESTRICTED VENT, USE
NIOSH APPRVD FILTER RESP TO REMOVE SOLID AIRBORNE PARTICLES OF
OVERSPRAY DURING SPRAY APPLICATION. IN RESTRICTED VENT AREAS, USE
NIOSH APPRVD RESP I/A/W 29 CFR 1910.134 TO REMOVE A (SUP DAT)
Ventilation:PROVIDE SUFFICIENT VENT, IN VOL & PATTERN, TO KEEP TLV &
LEL OF HAZ INGS BELOW LIMITS SPECIFIED, & TO REMOVE (SUP DAT)
Protective Gloves:WEAR CHEMICAL RESISTANT GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:EMERGENCY EYEWASH AND DELUGE SHOWER MEETING
ANSI DESIGN CRITERIA .
Work Hygienic Practices:REMOVE AND WASH SOILED CLOTHING BEFORE REUSE.
WASH HANDS BEFORE EATING OR SMOKING.
Supplemental Safety and Health
FIRE FIGHT PROC: NOT BE USED AS EXTING MEDIA. TAKE CARE TO PVNT SPREAD
OF BURNING LIQ W/WATER. CLSD CONTRS MAY EXPLODE WHEN EXPOSED TO
EXTREME HEAT. RESP PROT: COMBINATION OF PARTICULATES & VAPS. VENT :
DECOMP PRODS DURING WELDING/FLAME CUTTING ON SURFS COATED W/THIS
PROD.
Chemical Properties
Boiling Pt:B.P. Text:325F,163C
Vapor Pres:SEE ING 1
Vapor Density:HVR/AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER
Stability
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.
Disposal
Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS. DO NOT INCINERATE UNOPENED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.